CCNA 4 Practice final exam

Baca juga 

Novel Novel Naruto
http://novelnarutoja.blogspot.com/

Final Exam CCNA 4
http://jarkomja.blogspot.com/2013/11/ccna-4-final-exam-answer-ccna-4-final.html


Practice final exam

What translation method will allow a server to always keep the same public address?
static NAT
dynamic NAT
static NAT with overload
dynamic NAT with overload

A network administrator is tasked with maintaining two remote locations in the same city. Both locations use the same service provider and have the same service plan for DSL service. When comparing download rates, it is noticed that the location on the East side of town has a faster download rate than the location on the West side of town. How can this be explained?
The West side has a high volume of POTS traffic.
The West side of town is downloading larger packets.
The service provider is closer to the location on the East side.
More clients share a connection to the DSLAM on the West side.

Which combination of Layer 2 protocol and authentication should be used to establish a link without sending authentication information in plain text between a Cisco and a non-Cisco router

PPP with CHAP

Refer to the exhibit. A network administrator is creating a prototype to verify the new WAN design. However, the communication between the two routers cannot be established. Based on the output of the commands, what can be done to solve the problem?
Replace the serial cable .
Replace the WIC on RA.
Configure RA with a clock rate command.
Issue a no shutdown interface command on RB.

A network administrator is instructing a technician on best practices for applying ACLs. Which suggestion should the administrator provide?
Named ACLs are less efficient than numbered ACLs.
Standard ACLs should be applied closest to the core layer.
ACLs applied to outbound interfaces are the most efficient.
Extended ACLs should be applied closest to the source that is specified by the ACL.

Refer to the exhibit. A host that is connected to Fa0/0 is unable to acquire an IP address dynamically from the DHCP server. The output of the debug ip dhcp server command shows "DHCPD: there is no address pool for 172.16.1.1". What is the problem
 The Pool addresses for the 172network pool is incorrect 

Which two statements are true about IPv6 link local addresses? (Choose two.)
	They begin with the 2000::/3 prefix.
	They begin with the FE80::/10 prefix.
	They are assigned by IANA to an organization.
	They must be manually configured by the administrator.
	They are assigned to a host by a stateless autoconfiguration process.

 Refer to the exhibit. An ACL numbered 101 already exists on this router. What happens if the network administrator issues the commands that are shown in the exhibit

The existing ACL is modified to include the new commands

What are two characteristics of DSL technology? (Choose two.)
	Service providers deploy DSL in the local loop of the telephone network.
	Filters and splitters allow POTS and DSL traffic to share the same medium.
	DSL download rates are reduced by large volumes of POTS voice traffic.
	Uploads typically offer larger transfer rates than downloads.
	DSL is a shared medium that allows many users to share bandwidth available from the DSLAM.

At what physical location does the responsibility for a WAN connection change from the service provider to the user?

DMZ
local loop
CSU/DSU
demarcation poin

When would the multipoint keyword be used in Frame Relay PVCs configuration?
	when multicasts must be supported
	when using physical interfaces
	when participating routers are in the same subnet
	when global DLCIs are in use

 

Which wireless solution can provide mobile users with non line-of-sight broadband Internet access at speeds comparable to DSL or cable?
	Wi-Fi
	WiMAX
	satellite
	Metro Ethernet

What are two effective measures for securing routers? (Choose two.)
	Enable SNMP traps.
	Disable the HTTP server service.
	Use quotes, phrases, or poems to create passphrases.
	Configure remote administration through VTY lines for Telnet access.
	Protect all active router interfaces by configuring them as passive interfaces.

Refer to the exhibit. The SSH connections between the remote user and the server are failing. The correct configuration of NAT has been verified. What is the most likely cause of the problem?
SSH is unable to pass through NAT.
**There are incorrect access control list entries.
The access list has the incorrect port number for SSH.
The ip helper command is required on S0/0/0 to allow inbound connections.

What is a major characteristic of a worm?
	malicious software that copies itself into other executable programs
	tricks users into running the infected software
	a set of computer instructions that lies dormant until triggered by a specific event
	exploits vulnerabilities with the intent of propagating itself across a network

 Refer to the exhibit. What would be the result of entering the exhibited configuration on a Frame Relay router
Routing protocol multicast update can be forwarded across the frame relay PVC 

What effect would the Router1(config-ext-nacl)# permit tcp 172.16.4.0 0.0.0.255 any eq www command have when implemented inbound on the f0/0 interface?
	All TCP traffic is permitted, and all other traffic is denied.
	The command is rejected by the router because it is incomplete.
	All traffic from 172.16.4.0/24 is permitted anywhere on any port.
	Traffic originating from 172.16.4.0/24 is permitted to all TCP port 80 destinations.

Refer to the exhibit. Routers R1 and R2 have been configured with EIGRP in the same autonomous system. Computers PC1 and PC2 are not able to ping each other. Further investigation has revealed that the route to 192.168.10.0 is missing from the routing table on R2. What is the cause of the problem?
The networks are not correctly summarized.
The FastEthernet interfaces on R1 are configured as passive.
The network statements on R2 are incorrectly configured.
EIGRP on R1 does not recognize the 192.168.10.0 network.

In addition to standard security procedures, what additional feature of VPN technology supports privacy between end users? the implementation of a tunneling protocol the use of only baseband connections a requirement of active authentication via a RADIUS server the use of a call-back procedure to verify user credentials

Which statement is true about NCP?
Link termination is the responsibility of NCP.
Each network protocol has a corresponding NCP.
NCP establishes the initial link between PPP devices.
NCP tests the link to ensure that the link quality is sufficien

Which type of ACL will permit traffic inbound into a private network only if an outbound session has already been established between the source and destination?
extended
reflexive
standard
time-based

Refer to the exhibit. A network administrator has been asked to configure PPP with CHAP authentication over the serial link between routers R1 and R2. What additional configuration should be included on both routers to complete the task?

A network administrator is analyzing the data from a network performance baseline. Which condition will not be indicated in the baseline data?
	the IP addressing scheme of the network
	the most heavily used parts of the network
	congested areas of the network
	error rates in different parts of the network

While configuring a Frame Relay connection, when should a static Frame Relay map be used?
	the remote router is a non-Cisco router
	the local router is configured with subinterfaces
	broadcast traffic and multicast traffic over the PVC must be permitted
	globally significant rather than locally significant DLCIs are being used

Refer to the exhibit. Router1 is not able to communicate with its peer that is connected to this interface. Based on the output as shown, what is the most likely cause?

unplugged cable

Refer to the exhibit. Routers R1 and R2 are both configured for single area OSPF. Users who are connected to switch S1 are unable to access database applications that run on servers that are connected to S2. The network engineer is working remotely and only has the information that is shown in the exhibit to direct initial troubleshooting efforts. Based on the exhibit, which OSI layer is the most appropriate to start with for a divide-and-conquer approach?
network layer
application layer
data-link layer
physical layer

Refer to the exhibit. Router1 and Router2 each support separate areas of a data center, and are connected via a crossover cable. Resources attached to Router1 are unable to connect to resources attached to Router2. What is the likely cause?
The crossover cable is faulty.
The IP addressing is incorrect.
There is a Layer 2 problem with the router connection.
The upper layers are experiencing an unspecified problem.
One or both of the Ethernet interfaces are not working correctly.

Which three statements accurately describe attributes of a security policy? (Choose three.)
	It creates a basis for legal action if necessary.
	It should not be altered once it is implemented.
	It defines a process for managing security violations.
	It focuses primarily on threats from outside of the organization.
	It defines acceptable and unacceptable use of network resources.
	It provides step-by-step procedures to harden routers and other network devices.

Refer to the exhibit. You are a network administrator who has been tasked with completing the Frame Relay topology that interconnects two remote sites. How should the point-to-point subinterfaces be configured on HQ to complete the topology?

HQ(config-subif)# frame-relay interface-dlci 301 on Serial 0/0/0.1
HQ(config-subif)# frame-relay interface-dlci 302 on Serial 0/0/0.2

 Refer to the exhibit. Partial results of the show access-lists and show ip interface FastEthernet 0/1 commands for router R3 are shown. There are no other ACLs in effect. Host A is unable to telnet to host B. Which action will correct the problem but still restrict other traffic between the two networks?
Apply the ACL in the inbound direction.
Apply the ACL on the FastEthernet 0/0 interface.
**Reverse the order of the TCP protocol statements in the ACL.
Modify the second entry in the list to permit tcp host 192.168.10.10 any eq telnet.

Refer to the exhibit. All devices are configured as shown in the exhibit. PC1 is unable to ping the default gateway. What is the cause of the problem?
	The default gateway is in the wrong subnet.
	STP has blocked the port that PC1 is connected to.
	Port Fa0/2 on S2 is assigned to the wrong VLAN.
	S2 has the wrong IP address assigned to the VLAN30 interface.

Which important piece of troubleshooting information can be discovered about a serial interface using the show controllers command?
	queuing strategy
	serial cable type
	interface IP address

Which protocol is implicitly denied at the end of an IPv4 access list?
	IP
	TCP
	UDP
	HTTP

Refer to the exhibit. An administrator has added the exhibited commands to routers A and B, but no routing updates are exchanged between the two routers. Based on the information that is given, what is the likely cause of the problem?
Router A is advertising the wrong network.
The authentication key strings do not match.
The serial interfaces of routers A and B are not on the same network.
The authentication key numbers do not match the EIGRP process number for both routers.

Which method is most effective in protecting the routing information that is propagated between routers on the network?

Configure routing protocol authentication.

Which characteristic of VPN technology prevents the contents of data communications from being read by unauthorized parties?
	QoS
	latency
	reliability
	confidentiality

Refer to the exhibit. In the partial router configuration that is shown, what is the purpose of access list BLOCK_XYZ?
	to prevent source IP address spoofing by hosts on the Fa0/0 LAN
	to block access by Fa0/0 LAN hosts to all network services beyond the router
	to prevent users on the Fa0/0 LAN from opening Telnet sessions on the router
	to secure Fa0/0 hosts by allowing only locally sourced traffic into the Fa0/0 LAN

Refer to the exhibit. R1 is performing NAT overload for the 10.1.1.0/24 inside network. Host A has sent a packet to Web Server. What is the destination IP address of the return packet from Web Server when received at R1??

172.30.20.1:3333

Which Layer 2 access method separates traffic into time slots and is specified by DOCSIS for use with cable high speed Internet service?
	TDMA
	FDMA
	CDMA
	S-CDMA

Refer to the exhibit. A network administrator has issued the commands that are shown on Router1 and Router2. A later review of the routing tables reveals that neither router is learning the LAN network of the neighbor router. What is most likely the problem with the RIPng configuration?
	The serial interfaces are in different subnets.
	The RIPng process is not enabled on interfaces.
	The RIPng processes do not match between Router1 and Router2.
	The RIPng network command is missing from the IPv6 RIP configuration.

An administrator learns of an e-mail that has been received by a number of users in the company. This e-mail appears to come from the office of the administrator. The e-mail asks the users to confirm their account and password information. Which type of security threat does this e-mail represent?
cracking
phishing
phreaking
spamming

A recently patched application server is experiencing response time problems. The network on which the application server is located has been experiencing occasional outages that the network team believes may be related to recent routing changes. Network and application teams have been notified to work on their respective issues. Which statement applies to this situation?
	Only results from the software package should be tested as the network is designed to accommodate the proposed software platform.
	Scheduling will be easy if the network and software teams work independently.
	It will be difficult to isolate the problem if two teams are implementing changes independently.
	Results from changes will be easier to reconcile and document if each team works in isolation.

A router in a Frame Relay network needs to forward a message received from a host. What two methods does the router use to identify the correct VC to forward the message? (Choose two.)
	The router forwards the frame to all ports in the network and learns the address from the reply frame.
	The destination host IP address is embedded in the DLCI.
	The router searches Inverse ARP tables for maps of DLCIs to IP addresses.
	A table of static mappings can be searched.
	The router broadcasts a request for the required IP address.

Refer to the exhibit. Which statement correctly describes how Router1 processes an FTP request entering interface s0/0/0, destined for an FTP server at IP address 192.168.1.5?

It matches the incoming packet to the access-list 101 permit ip any 192.168.1.0 0.0.0.255 statement, ignores the remaining statements in ACL 101, and allows the packet into the router.

Refer to the exhibit. A network administrator has been asked to configure PPP with PAP authentication over the serial link between routers R1 and R2. What additional configuration should be included on both routers to complete the task?

A network administrator has moved the company intranet web server from a switch port to a dedicated router interface. How can the administrator determine how this change has affected performance and availability on the company intranet?
	Interview departmental administrative assistants and determine if they think load time for web pages has improved.
	Compare the hit counts on the company web server for the current week to the values that were recorded in previous weeks.
	Conduct a performance test and compare with the baseline that was established previously.
	Determine performance on the intranet by monitoring load times of company web pages from remote sites.

Contoh Judul Tugas akhir dan skripsi Jaringan Komputer

Kali ini Saya ingin berbagi tentang judul jaringan komputer, sebenernya saya gak mau bahas judul tugas akhir karena semua dosen mengesalkan kalau mahasiswa lagi mengajukan judul. ya....ada yang kurang ini lah.....judul nya, sudah ada yang mengajukan.....tidak termasuk dalam program jaringan lah......dan sebagai nya lah......

sebelum nya saya mohon maaf bila ada judul yang saya copas atau secara tedak sengaja sama dengan judul saya share........

ya....maklum manusia pasti ada salah......

langsunga ja ya pada contoh judul nya.......

RANCANG APLIKASI WIRELESS HACKING PADA SISTEM OPERASI LINUX BERBASIS PYTHON .

SISTEM PENDUKUNG KEPUTUSAN SELEKSI KARYAWAN UNTUK JABATAN ASSISTEN MANAGER PADA WTP AMRITA LAMPUNG DENGAN METODE PROFILE MATCHING

RANCANG BANGUN GAME SPELL CARD DUEL" DENGAN VISUAL STUDIO.NET BERBASIS MULTIPLAYER"

RANCANGAN JARINGANG KOMPUTER PADA CAFE DAN GAME CENTER

PERANCANGAN SISTEM TOKO BUKU ONLINE BERBASIS WAP

RANCANGAN Jaringan PC Cloning Menggunakan Software Winconnect

Merancang Sistem Gateway Pengolah Data Radio Paket

Perancangan Sistem Informasi Penerimaan Karyawan Dan Absensi Pada Bagian Personalia

Perancangan Dan Implementasi Jaringan IPV6 Di Its-Net Dengan Sistem Operasi Linux

Rancang Bangun Aplikasi Network Traffic Monitor

Rancang Bangun Intranet Video Live Streaming Untuk Proses Belajar Mengajar

Rancang Bangun Sistem Informasi Perpustakaan Berbasis Web

Analisa Jaringan Wireless-LAN

Aplikasi Pencatatan Kehadiran Mahasiswa Menggunakan Sidik Jari

Analisis Sistem Keamanan Jaringan Hot-Spot

PENGEMBANGAN JARINGAN KOMPUTER DI WTP AMRITA LAMPUNG BERBASIS LINUX

MERANCANG SISTEM UPM MENGUNAKAN ROUTER CISCO

ANALISA SISTEM PERANCANGA PEMBELIAN ONLINE

Analisa Traffic Internet pada Jaringan Local Area Network

Monitoring Ruangan Menggunakan Kamera IP Dengan Bahasa Personal Home Page (PHP)

Perancangan jaringan LAN menggunakan cisco router

Perncangan Infrastruktur jaringan WAN menggunakan cisco router seri 2811

Membangun FTP Server Dengan Menggunakan Linux Ubuntu 8.04

Perancangan Dan Pembuatan Forum Diskusi Mahasiswa D3 TKJ di Universitas Berbasiskan Web.

Perancangan Access Point Berbasis LAN Dengan Radius Server Di Sekolah ........

Mengembangkan Jaringan Komputer Berbasis Wifi Untuk Peningkatan Layanan Pembelajaran Di Sekolah ..........

Simulasi Berbasis Perangkat Lunak Untuk Menganalisa Wireless Lan Security

Membuat Jaringan Lokal Dengan PC Router Menggunakan Operating Sistem Unix Free BSD

Membangun Jaringan Komputer Dengan Koneksi Internet (ADSL) Untuk Karyawan TU di Sekolah .............

Membangun Jaringan Berbasis LAN Di Sekolah ........

itu saja dari saya, semoga bermanfaat,

tapi kalau gak bermanfaat mohon maaf...ini karna kurang nya pengetahuan saya.....

terima kasih.......

Baca juga
perancangan jaringan vlan

http://jarkomja.blogspot.com/2014/03/perancangan-jaringan-vlan.html

Rancangan DHCP untuk router

http://jarkomja.blogspot.com/2014/03/pembuatan-dhcp-untuk-router.html


Contoh Tugas Akhir

Perancangan Jaringan WAN

http://jarkomja.blogspot.com/2013/12/perancangan-jaringan-wan_9.html

Metodelogi Penelitian
http://fransadja.blogspot.com/2013/01/frans.blogspot.html

Novel Novel Naruto

http://novelnarutoja.blogspot.com

Puisi Pujangga
http://fransadja.blogspot.com/2011/12/puisi-seorang-bujangan.html 

Pengenala Modul Microsoft Word 2007

Kali ini saya Inggin berbago Modol tentang Microsoft word 2007....

Selamat membaca..............................

Pengenalan word 2007

Modul Tutorial MS. Word 2007 – Microsoft Office Word merupakan perangkat lunak andalah Microsoftyang berfungsi sebagai pengolah kata. Banyak terdapat fasilitas dalam software ini, yang mampu menunjung berbagai keperluan bagi para penggunanya, mulai dari pengetikan text, penyusunan naskah atau pun proposal, laporan, karya ilmiah, surat lamaran kerja dan pembuatan diagram atau tabel serta menyisipkan berbagai objek gambar dalam tulisan.

Dalam catatan sejarah, microsoft office word pertama kali diterbitkan sekitar tahun 1983, dimana pada waktu itu namanya Multi-Tool Word untuk Xenik. Seiring dengan perkembangannya, maka munculah versi-versi terbaru lainnya untuk berbagai sistem operasi, seperti DOS (1983), Apple Macintosh (1984), SCO UNIK, OS/2, dan Microsoft Windows (1989) dan setelah menjadi bagian dari Microsoft Office System 2003 dan 2007, kemudian diberi nama Microsoft Office Word.

Sampai saat ini, mayoritas pengguna komputer menggunakan microsoft ofiice word 2007, namun karena MS. Word 2007 masih terbilang baru, maka banyak dari mereka yang masih kebingungan dalam mengoperasikan program tersebut. Untuk itu, lewat artikel ini, bermaksud berbagi modul tutorial microsoft office word 2007 lengkap dengan sejarah perkembangan microsoft word.

A. SEJARAH MICROSOFT OFFICE WORD

Banyak ide dan konsep Word diambil dari Bravos, pengolah kata berbasis grafik pertama yang dikembangkan di Xerox Palo Alto Research Center (PARC). Pencipta Bravo, Charles Simonyi, meninggalkan Xerox PARC dan pindah ke Microsoft pada 1981. Simonyi juga menggaet Richard Brodie dari PARC. Pada 1 Februari 1983, pengembangan Multi-Tool Word dimulai.

Setelah diberi nama baru Microsoft Word, Microsoft menerbitkan program ini pada 25 Oktober 1983 untuk IBM PC. Saat itu dunia pengolah kata dikuasai oleh WordPerfect dan juga WordStar.

Word memiliki konsep “What You See Is What You Get”, atau WYSIWYG, dan merupakan program pertama yang dapat menampilkan cetak tebal dan cetak miring pada IBM PC. Word juga banyak menggunakan tetikus yang saat itu tidak lazim sehingga mereka menawarkan paket Word-with-Mouse. Word processor berbasis DOS lain, seperti WordStar dan WordPerfect, menampilkan hanya teks dengan kode markup dan warna untuk menandai pemformatan cetak tebal, miring, dan sebagainya.

Word untuk Macintosh, meski memiliki banyak perbedaan tampilan dari versi DOS-nya, diprogram oleh Ken Shapiro dengan sedikit perbedaan dari kode sumber versi DOS, yang ditulis untuk layar tampilan resolusi tinggi dan printer laser, meskipun belum ada produk seperti itu yang beredar untuk publik. Setelah LisaWrite dan MacWrite, Microsoft pun mencoba untuk menambahkan fitur WYSIWYG ke dalam paket program Word for Macintosh. Setelah Word for Macintosh dirilis pada tahun 1985, program tersebut mendapatkan perhatian yang cukup luas dari masyarakat pengguna komputer. Microsoft tidak membuat versi Word 2.0 for Macintosh, untuk menyamakan versi dengan Word untuk sistem atau platform lainnya.

Versi selanjutnya dari Word for Macintosh, adalah Word 3.0, yang dirilis pada tahun 1987. Versi ini mencakup banyak peningkatan dan fitur baru tapi memiliki banyak bug. Dalam hanya beberapa bulan, Microsoft mengganti Word 3.0 dengan Word 3.01, yang jauh lebih stabil. Semua pengguna terdaftar dari Word 3.0 dikirimi surat yang berisi salinan Word 3.01 secara gratis, sehingga menjadikan hal ini kesalahan Microsoft paling mahal untuk ditebus pada waktu itu. Word 4.0, yang dirilis pada tahun 1989, merupakan versi yang sangat sukses dan juga stabil digunakan.Tahun 1990-1995.

Pada rentang tahun ini, Word for Windows diluncurkan. Versi pertama dari Word for Windows dirilis pada tahun 1989 dengan harga 500 Dolar Amerika Serikat. Dengan dirilisnya Microsoft Windows 3.0 pada tahun selanjutnya, penjualan pun akhirnya terdongkrak naik, mengingat Word for Windows 1.0 didesain untuk Windows 3.0 dan performanya sangat buruk jika dijalankan pada versi sebelumnya. Microsoft menunggu hingga merilis Word 2.0 untuk mengukuhkan Microsoft Word sebagai pemimpin pasar pengolah kata. (Sumber: id.wikipedia.org)

MEMULAI MICROSOFT WORD
Untuk memulai menjalankan program microsoft word? Silakan ikuti langkah-langkah berikut :
1. Pilih tombol Start di pojok kiri bawah tampilan windows.
2. Setelah muncul tampilan menunya pilih Program, kemudian Microsoft Office dan Pilih
3. Microsoft Office Word 2007.

Unsur-unsur utama Layar Ms Word.
1. Judul Windows
Baris Judul Menampilkan nama file dan aplikasi Microsoft Word, nama file sebelum dirubah adalah Document1, Document2 dan seterusnya. Pada pojok kanan sebelahnya window terdapat button minimize, maximize
dan menutup aplikasi word.

2. Office Button
Digunakan untuk :
- Membuat file baru
- Membuka file
- Menyimpan file
- Mencetak
- Keluar dari word
Disebelah kanan office button terdapat button yang digunakan untuk menyimpan, Undo, Redo dan Customize Quick Access Toolbar.

3. Customize Quick Access Toolbar
Digunakan untuk menampilkan button2 yang diinginkan untuk tampil pada taskbar, sebagai contoh jika kita klik button open dan new document, akan muncul button tersebut pada taskbar. Sebagai tips, tampilkan button yang sering anda gunakan untuk mempercepat pengerjaan.

4. Menu
Setiap menu yang aktif (yang kita Klik) akan memunculkan toolbar dibawahnya.

5. Toolbar
Merupakan deretan tool-tool (gambar-gambar yang berbentuk tombol) yang mewakili perintah dan berfungsi untuk mempermudah dan mengefisienkan pengoperasian program.

6. Kursor
Kursor atau Insertion Point merupakan indikator tempat dimana teks akan muncul jika kita akan mengetik. Posisi ini perlu diperhatikan karena Ms Word menggunakannya sebagai dasar dalam melakukan suatu pekerjaan yang kita perintahkan.

7. Penggulung Teks
Untuk memudahkan dalam membaca suatu dokumen dengan menggulung layar vertical dan horizontal.

8. Memasukkan Teks
Setelah mengenal dasar-dasar layar Word, teks dapat langsung dimasukkan. Ada beberapa hal yang perlu diketahui:
* Tab digunakan untuk mengidentasi pada baris pertama.
* Word secara otomatis akan memulai baris baru sewaktu teks mencapai tepi kanan halaman.
* Apabila terjadi kesalahan mengetik tekan Backspace untuk menghapusnya.
* Tekan enter untuk menambah baris kosong.
* Titik Sisip (kursor) Digunakan untuk memulai memasukkan teks.
* Penunjuk Mouse bergerak dilayar sewaktu mouse digerakkan. Penunjuk ini tampak dalam bentuk huruf I atau panah.

9. Memperbaiki Teks
Ketika suatu dokumen dibuat, seringkali perlu memindahkan titik sisip untuk menambah atau menghapus teks di lokasi yang berbeda. Caranya sebagai berikut :
9.1 Menggunakan Mouse
Geser pointer mouse yang berbentuk I-beam ke posisi yang anda kehendaki pada area teks dan klik mouse. Jika posisi yang anda tuju tidak tampak, perlu menggulung ke lokasi yang diinginkan, gunakan panah atas dan bawah untuk naik atau turun satu baris. Gunakan panah double atas dan bawah (dibawah toolbar vertical) untuk naik atau turun satu halaman.

9.2 Menggunakan Keyboard
Jika anda menggunakan tombol pada numeric keypad, pastikan bahwa NUM LOCK dalam keadaan off. Perhatikan tabel berikut ini.

Perpindahan
Perintah
Satu karakter ke kiri
←
Satu karakter ke kanan
→
Satu baris ke atas
↑
Satu baris ke bawah
↓
Ke akhir baris
End

Ke awal baris

Home

Naik satu layar

Page Up

Ke bawah satu layar

Page Down

Akhir dokumen

Ctrl + End

Awal dokumen

Ctrl + Home


10. Menyimpan Dokumen
Untuk menyimpan dokumen klik office button kemudian pilih Save atau klik button save pada Toolbar atau bisa langsung menggunakan keyword dengan menekan Ctrl + S dan akan muncul sebuah dialog, Kemudian pilihlah lokasi file (directory) pada bagian Save in:, ketiklah nama file pada bagian File name, kemudian tekan tombol Save. Sebagai latihan berilah nama pada file yang sudah diketik dengan nama Lat1.doc

11. Menutup Dokumen
Bila sudah selesai mengerjakan suatu dokumen dan sudah selesai menyimpannya, mungkin perlu menutup dokumen dan setelah itu mengerjakan dokumen lain. Klik office button dan pilih Close.

12. Membuka Dokumen
Untuk membuka dokumen klik office button dan pilih Open, Word akan menampilkan dialog box, kemudian Anda carilah directory dan Folder Yang menampung file yang akan dibuka pada bagian Look in lalu klik file yang akan dibuka kemudian tekan button Open maka file anda akan ditampilkan dilayar Word. Sebagai latihan, bukalah kembali file Lat1.doc yang sudah dibuat tadi.

A. Memulai Pembuatan Naskah

Aktifkan lembar kerja Microsoft Word
Aturlah Margin lembar kerja
Ketiklah naskah yang diinginkan

B. Setting / Mengatur Halaman Microsoft Word
1. Klik Page Layout
a. Klik Tab Margin
b. Pilih bentuk margin yang diinginkan
c. Jika tidak ada ukuran yang cocok, klik di Custom Margin dan tentukan:
* Top : Jarak antara sisi atas kertas dengan teks/naskah.
* Bottom : Jarak antara sisi bawah kertas dengan teks/naskah.
* Left : Jarak antara sisi kiri kertas dengan sisi kiri naskah.
* Right : Jarak antara sisi kanan kertas dengan sisi kanan naskah.
* Gutter : Jarak spasi tambahan pada margin kiri yang ditujukan sebagai tempat penjilidan.
* Gutter Position : Letak gutter.
* Orientation : Pengaturan arah cetakan halaman dengan Portrait (memanjang) dan Landscape (melebar).
* Preview : Tampilan layar Word.

2. Paper Size
a. Klik di SIZE, kemudian tentukan ukuran kertas yang di inginkan.
b. Jika tidak ada yang sesuai klik di More Paper Size
Contoh : A4, Legal, dll.

C. Tata Cara Penulisan Microsoft Word 2007
Untuk pengetikan huruf besar di awal kata atau kalimat, tekanlah tombol Shift bersamaan dengan tombol huruf awal kata (jika Caps Lock tidak hidup)
Untuk pengetikan naskah dalam huruf besar semua, tekan tombol Caps Lock.
Untuk menghapus kata atau kalimat sebelah kiri tekan tombol Backspace.
Untuk menghapus kata atau kalimat sebelah kanan tekan tombol Delete.
Untuk menurunkan kursor ke baris berikutnya tekan tombol Enter.
Untuk masuk ke paragraph baru tekan tombol Tab.
Untuk memberikan spasi pada suatu kata atau kalimat tekan tombol Spacing.
Untuk menuju ke awal kalimat teks tekan tombol Home.
Untuk menuju ke akhir kalimat teks tekan tombol End.
Untuk mengaktifkan tombol angka keyboard sebelah kanan tekan tombol Num Lock.

D. Pengaturan Perataan Teks Microsoft Word
Untuk meratakan teks, pilih salah satu bentuk perataan yang diinginkan:
Align Left (Ctrl + L) : Perataan teks sebelah kiri.
Center (Ctrl + E) : Perataan teks di tengah.
Align Right (Ctrl + R) : Perataan teks sebelah kanan.
Justify (Ctrl + J) : Perataan teks sebelah kiri dan kanan

MENGEDIT NASKAH PADA MICROSOFT WORD 2007

A. Membuat Block Pada Teks

Menggunakan Keyboard, tempatkan kursor pada awal kata / kalimat yang akan diblock
Tekan tombol Shift sambil menekan tanda panah ( –> ) ke awal kata / kalimat.

Atau bisa menggunakan Mouse
Klik kiri tanpa dilepas (drag ) pada awal kata / kalimat yang akan diblock
Seret penunjuk mouse hingga ke akhir kata / kalimat yang akan diblock
Lepas klik mouse tersebut

Untuk menghilangkan tanda block di teks klik di sembarang tempat dalam jendela dokumen.

B. Mengcopy Kata / Kalimat
Block kata / kalimat yang akan di-copy
Klik icon Copy atau dengan tombol Ctrl + C
Letakkan kursor pada tempat yang akan diletakkan hasil copy-an
Klik icon Paste atau dengan tombol Ctrl + V

C. Memindahkan Kata / Kalimat
Block kata / kalimat yang akan dipindahkan
Klik klik icon Cut atau dengan tombol Ctrl + X
Letakkan kursor pada tempat yang ingin dipindahkan.
Klik icon paste atau dengan tombol Ctrl + V

D. Membatalkan Perintah
Apabila dalam pengetikan tidak sengaja melakukan kesalahan, baik dalam pengeditan, pemformatan dan lain sebagainya maka gunakan:
Undo (Ctrl + Z) : Membatalkan pengeditan.
Redo (Ctrl + Y) : Membatalkan pembatalan pengeditan

E. Change Case

1. Blok kalimat / kata yang ingin dirubah format hurufnya.
2. Klik menu Home – Change Case
Sentence case : Mengubah kalimat pada teks dengan diawali huruf besar.
lowercase : Mengubah kata atau kalimat dengan huruf kecil.
UPPERCASE : Mengubah kata atau kalimat dengan huruf besar.
Title Case : Mengubah setiap awal kata dengan huruf besar.
tONGLE cASE : Mengubah setiap awal kata dengan huruf kecil

F. Find, Replace, and Go T0
1. Find (Mencari)
Klik icon Find atau tekan tombol Ctrl + F
Ketik kata yang akan dicari di kotak Find What
Klik Find Next untuk mencari
Tutup jendela tampilan ( X ) Find and Replace

2. Replace (Mengganti)
Klik icon Replace atau tekan tombol Ctrl + H
Ketik kata yang ada pada dokumen yang ingin diganti di kotak Find What
Ketik kata pengganti di kotak Replace With
Klik Replace All (Untuk mengganti semua kata) atau Replace (untuk mengganti satu kata saja)
Tutup jendela tampilan Find and Replace

3. Go To (Menuju Ke Halaman Tertentu)
Klik icon Go To atau tekan tombol Ctrl + G
Ketik angka atau nomor halaman yang dituju pada Enter Page Number.
Lalu klik Next

PEMFORMATAN NASKAH PADA MICROSOFT WORD 2007

A. Mengatur Paragraf dan Spasi

Klik icon Paragraph
Klik Indent and Spacing
Pada Spacing tentukan berapa spasi yang diinginkan
Klik Ok.

Atau dengan cara lain :
- Blok kalimat yang ingin diatur paragrafnya
- Tekan tombol kombinasi:
o Untuk 1 spasi tekan Ctrl + 1 (Single)
o Untuk 1½ spasi tekan Ctrl + 5 (1,5 lines)
o Untuk 2 spasi tekan Ctrl + 2 (Double)

B. Bullets and Numbering
1. Bullets
Blok atau tandai bagian naskah yang ingin dibuat Bullets.
Klik tab Home klik icon bullet
Untuk memilih jenis bullet klik tanda panak ke bawah, klik bullet yang anda harapkan.
Selain itu juga bisa memilih alternatif Bulleted yang lain dengan mengklik Define New Bullet.
Klik Character, lalu pilih jenis Bulleted yang Anda inginkan.
Klik OK

2. Numbered
Blok atau tandai bagian naskah yang ingin dibuat numbered.
Klik tab Home klik icon numbered
Untuk memilih jenis bullet klik tanda panak ke bawah, klik bullet yang anda harapkan.
Selain itu juga bisa memilih alternatif Bulleted yang lain dengan mengklik Define New Bullet.
Klik Character, lalu pilih jenis Bulleted yang Anda inginkan.
Klik OK

C. Borders and Shading

1. Membuat Border
Dari tab Page Layout klik ikon page borders
Page Border : Membuat garis bingkai halaman.
* Setting : Memilih bentuk bingkai halaman.
* Style : Memilih bentuk garis bingkai halaman.
* Color : Memilih warna garis bingkai halaman.
* Width : Memilih ketebalan garis bingkai halaman.
* Art : Memilih jenis bingkai halaman.
*Options : Memberikan pilihan pada jarak bingkai.
Klik OK

2. Membuat Columns
Klik tab Page Layout
* Klik icon Columns
* Tentukan jumlah kolom yang kalian inginkan
* Jika tidak ada yang sesuai klik di More Coloums, kemudian tentukan jumlah kolom.
- Number of columns : Menentukan jumlah kolom.
- Width : Menentukan lebar kolom
- Preview : Melihat tampilan sementara
* Klik OK

3. Membuat Drop Cap
* Klik tab insert
* Klik di Icon Drop Cap
* Pilih Dropped atau In Margin
* Seandainya bentuknya tidak sesuai klik di Drop Cap Options
* Tentukan pengaturannya :
- Position : Pilih letak teks yang diinginkan.
- Font : Pilih jenis huruf.
- Lines to drop : Tentukan jumlah baris tinggi drop cap.
- Distance from text : Memodifikasi jarak drop cap dengan teks
* Klik OK

D. Menyisipkan Nomor Halaman Ms. Word 2007
Untuk dapat menyisipkan nomor di setiap lembar atau halaman pada microsoft word 2007, silakan ikuti langkah-langkah berikut :
Klik tab Insert
Klik icon Page Number
Klik tanda panah kebawah dan tentukan posisi number
Jika tidak ada yang sesuai, klik di Format Page Number

Format : Memodifikasikan format nomor halaman.
* Number format : Memilih format nomor halaman.
* Page numbering : Mengatur urutan nomor halaman.
- Continue from previous section : Penomoran halaman secara berurutan mulai dari awal hingga akhir.
- Start At : Pengaturan nomor halaman awal

E. Membuat Header dan Footer Ms. Word 2007
Klik di icon Header atau Footer
Klik tanda panah ke bawah dan tentukan posisi Header
Isikan catatan atas pada kolom Header dan catatan bawah pada kolom Footer
Klik Close

F. Menyisipkan Teks Word Art Pada Ms. Word 2007
Klik di icon WrdArt
Klik tanda panah kebawah dan pilih disain WordArt.
Edit WordArt Text: Ketik teks pada kotak teks.

* Font : Memilih jenis huruf.
* Size : Memilih ukuran huruf.
* B (Bold) : Teks WordArt cetak tebal.
* I (Italic) : teks WordArt cetak miring

G. Menyisipkan Gambar Pada Microsoft Word 2007
Klik icon ClipArt
Pada pane tugas Insert ClipArt, klik Clip Organizer dan pilih gambar yang ada.
Klik perintah Copy dan tutup jendela Microsoft Clip Organizer
Klik perintah Paste
Memasukkan gambar dari File
Klik Icon Picture
Pilih file gambar yang ada – Klik tombol Insert

MEMBUAT TABEL PADA MICROSOFT WORD 2007

A. Membuat Tabel Word
=> Klik tab Insert Klik icon Table
=> Klik tanda panah kebawah dan tentukan jumlah baris dan kolom yang dibutuhkan.

Jika tidak ada bentuk kolom yang sesuai, klik Insert Table
o Table size : Ukuran table.
* Number of columns : Tentukan jumlah kolom.
* Number of rows : Tentukan jumlah baris
o AutoFit behavior : Pengepasan tabel otomatis.
o AutoFormat : Memilih bentuk format tabel.
=> OK

B. Fasilitas Pengolahan Tabel
Dari Menu Tab pilih :
Draw Table : Menggambar kotak tabel.
Insert : Menyisip tabel, kolom, baris atau sel.
Delete : Menghapus tabel, kolom, baris atau sel.
Select : Memilih tabel, kolom, baris atau sel.
Merge Cells : Menggabungkan sel.
Split Cells : Membagi sel.
Split Table : Membagi tabel.
Table AutoFormat : Memilih format tabel.
Auto Fit : Mengepas kolom / baris otomatis.
Heading Rows Repeat : Mengulangi judul tabel ke tabel halaman berikutnya.
Convert : Mengubah jenis penulisan teks menjadi tabel atau sebaliknya.
Sort : Mengurutkan data tabel.
Formula : Operasi perhitungan data tabel.
Hide Gridlines : Menyembunyikan garis bantu tabel.
Table Properties : Memodifikasikan tabel, kolom, baris atau sel

C. Cara Menggunakan Formula Pada Microsoft Word 2007
Letakkan kursor pada sel yang akan diisi rumus
Klik tab Layout
Klik di icon Formula
Isikan kotak Formula dengan

Keterangan :
o =Product(Left)→ Untuk mengalikan semua bilangan yang ada sebelah kiri
o =Product(Right)→ Untuk mengalikan semua bilangan yang ada sebelah kanan
o =Product(Above) → Untuk mengalikan semua bilangan yang ada diatasnya
o =Sum(Left)→ Untuk menjumlahkan semua bilangan yang ada sebelah kiri
o =Sum(Right)→ Untuk menjumlahkan semua bilangan yang ada sebelah kanan
o =Sum(Above)→ Untuk menjumlahkan semua bilangan yang ada atasnya
Klik OK

CARA MENGGUNAKAN AUTOSHAPES

a. Membuat AutoShapes

Klik tab Insert Klik icon Shapes.
Klik tanda panah kebawah.
Pilih bentuk yang diinginkan.
Letakkan penunjuk mouse diawal gambar.
lalu drag (seret) sesuai dengan keinginan, lalu lepas drag-nya.

b. Memasukkan Teks pada AutoShapes
Klik gambar AutoShape yang ingin diisi teks di dalamnya
Klik icon Text Box
Klik pointer pada gambar AutoShape yang ingin diisi tulisan di dalamnya
Ketikkan Teks yang diinginkan dalam kotak tersebut

Atau
Klik kanan gambar AutoShape yang ingin diisi teks di dalamnya
Klik Add Text

Ketikkan Teks yang diinginkan dalam kotak tersebut

RUMUS MICROSOFT WORD

A. Membuat Typesetting Matematis

Klik tab Insert Klik icon Equation
Klik tanda panah kebawah dan pilih jenis Equation yang anda inginkan
Jika tidak ada yang cocok klik di Insert New Equation
Ketik Equation yang anda inginkan
Jika telah selesai klik sembarang tempat dalam lembaran kerja

B. Subscript (Pangkat bawah) dan Superscript (Pangkat Atas) Pada Microsoft Word 2007
Blok huruf atau kalimat yang akan dijadikan subscript atau superscript
Klik tab Insert dan klik icon Subscript atau Superscript
Dapat juga dengan mtekan tombol kombinasi:

o Ctrl + = atau klik icon (untuk subscript / huruf agak kecil dan kebawah sedikit)
o Ctrl + Shift + = atau klik icon (untuk superscript / huruf agak kecil dan sedikit
ke atas)

semoga bermanfaat ...................................

CCNA 4 Chapter 2 2014

Semoga Berguna

Selamat mencoba peruntungan ........


1.

Which WAN technology is cell-based and well suited to carry voice and video traffic?

VSAT
ISDN
Frame Relay
ATM*

2
Which WAN connectivity method would be used in a remote location where there are no service provider networks?

VPN
WiMAX
cable
VSAT*

3
Which network scenario will require the use of a WAN?

Employees need to access web pages that are hosted on the corporate web servers in the DMZ within their building.
Employees need to connect to the corporate email server through a VPN while traveling.*
Employee workstations need to obtain dynamically assigned IP addresses.
Employees in the branch office need to share files with the headquarters office that is located in a separate building on the same campus network.

4
Which two technologies use the PSTN network to provide an Internet connection? (Choose two.)

ATM
ISDN
Frame Relay
MPLS
dialup

5
Which geographic scope requirement would be considered a distributed WAN scope?

regional
one-to-one
global
local
one-to-many
many-to-many*

6
What are two advantages of packet switching over circuit switching? (Choose two.)

A connection through the service provider network is established quickly before communications start.
There are fewer delays in the data communications processes.
The communication costs are lower.
Multiple pairs of nodes can communicate over the same network channel.*
A dedicated secure circuit is established between each pair of communicating nodes.

7
Which connectivity method would be best for a corporate employee who works from home two days a week, but needs secure access to internal corporate databases?

VPN*
WiMAX
DSL
cable

8

Place the options in the following order:

- not scored – 
CPE 
Local Loop 
– not scored – 
DTE 
DCE

9
Which wireless technology provides Internet access through cellular networks?

satellite
municipal WiFi
LTE*
WiMAX

10
What is a requirement of a connectionless packet-switched network?

Full addressing information must be carried in each data packet.*
A virtual circuit is created for the duration of the packet delivery.
Each packet has to carry only an identifier.
The network predetermines the route for a packet.

11
A customer needs a WAN virtual connection that provides high-speed, dedicated bandwidth between two sites. Which type of WAN connection would best fulfill this need?

circuit-switched network
packet-switched network
MPLS
Ethernet WAN*

12
Which WAN technology establishes a dedicated constant point-to-point connection between two sites?

ATM
Frame Relay
leased lines*
ISDN

13
A company needs to interconnect several branch offices across a metropolitan area. The network engineer is seeking a solution that provides high-speed converged traffic, including voice, video, and data on the same network infrastructure. The company also wants easy integration to their existing LAN infrastructure in their office locations. Which technology should be recommended?

Frame Relay
Ethernet WAN*
ISDN
VSAT

14
A home user lives within 10 miles (16 kilometers) of the Internet provider network. Which type of technology provides high-speed broadband service with wireless access for this home user?

WiMAX*
DSL
802.11
municipal Wi-Fi

15
Which two devices are needed when a digital leased line is used to provide a connection between the customer and the service provider? (Choose two.)

dialup modem
access server
DSU*
CSU*
Layer 2 switch

16

Place the options in the following order: 
uses traditional video network 
uses traditional phone network 
set up by a city to provide free Internet access 
slow access (upload speed is about one-tenth download speed) 
– not scored -

17
What is a feature of dense wavelength-division multiplexing (DWDM) technology?

It replaces SONET and SDH technologies.
It provides Layer 3 support for long distance data communications.
It provides a 10 Gb/s multiplexed signal over analog copper telephone lines.
It enables bidirectional communications over one strand of fiber.*

18
What is the recommended technology to use over a public WAN infrastructure when a branch office is connected to the corporate site?

municipal Wi-Fi
VPN*
ATM
ISDN

19
A small company with 10 employees uses a single LAN to share information between computers. Which type of connection to the Internet would be appropriate for this company?

a broadband service, such as DSL, through their local service provider*
a dialup connection that is supplied by their local telephone service provider
Virtual Private Networks that would enable the company to connect easily and securely with employees
private dedicated lines through their local service provider

20
What is a long distance fiber-optic media technology that supports both SONET and SDH, and assigns incoming optical signals to specific wavelengths of light?

ATM
MPLS
ISDN
DWDM*

21
A new corporation needs a data network that must meet certain requirements. The network must provide a low cost connection to sales people dispersed over a large geographical area. Which two types of WAN infrastructure would meet the requirements? (Choose two.)

private infrastructure
dedicated
public infrastructure*
Internet*
satellite

22
What are two common high-bandwidth fiber-optic media standards? (Choose two.)

ITU
ANSI
ATM
SDH*
SONET*

Semoga bermanfaat ...............

CCNA 4 chapter 1 2014

Selamat mencoba ................

ccna 4 chapter 1 2014

1 

What are two structured engineering principles necessary for successful implementation of a network design? (Choose two.)

modularity*
security
availability
quality of service
resiliency*

2 
What is an important first consideration when starting to design a network?

size of the network*
access security
protocols to be used
type of applications

3 
Which layer of the Cisco Collaboration Architecture contains unified communications and conference software such as Cisco WebEx Meetings, WebEx Social, Cisco Jabber, and TelePresence?

service provider edge
enterprise WAN
applications and devices*
services module

4 
In which layer of the hierarchical enterprise LAN design model would PoE for VoIP phones and access points be considered?

core
physical
data link
access*
distribution

5 
Which network module is the fundamental component of a campus design?

access-distribution module*
services module
data center
enterprise edge

6 
In a hierarchical network design, which layers may be combined into a collapsed core for smaller networks?

core, distribution, and access
distribution and access
core and access
core and distribution*

7

Refer to the exhibit. Which type of ISP connectivity to the service provider edge is being used by company A?

dual-homed
dual-multihomed
single-homed
multihomed*

8 
What is one advantage to designing networks in building block fashion for large companies?

mobility
redundancy
increased network access time
failure isolation*

9 
A network engineer wants to redesign the wireless network and make use of wireless network controllers that manage the many deployed wireless access points. In which network design module of the campus network architecture would the centralized wireless network controllers be found?

services*
access-distribution
enterprise edge
data center

10 
Which two devices would commonly be found at the access layer of the hierarchical enterprise LAN design model? (Choose two.)

Layer 3 device
firewall
access point* 
Layer 2 switch*
modular switch

11 
Which approach in networking allows for network changes, upgrades, or the introduction of new services in a controlled and staged fashion?

modular*
network module
borderless
static

12

Refer to the exhibit. Which type of Cisco hierarchical LAN design model is used at school site 1?

7 layer
two-tier collapsed core*
three-tier
3 layer

13 
Which three network architectures have been introduced by Cisco to address the emerging technology challenges created by the evolving business models? (Choose three.)

Cisco Collaboration* 
Cisco Data Center* 
Cisco Borderless*
Cisco Enterprise Edge
Cisco Enterprise Campus
Cisco Enterprise Branch

14 
Which Cisco technology allows diverse network devices to connect securely, reliably, and seamlessly to enterprise network resources?

Cisco AnyConnect*
enterprise edge
building distribution
service provider edge

15 
The network design for a college with users at five sites is being developed. Where in the campus network architecture would servers used by all users be located?

services
enterprise edge
data center*
access-distribution

16 
What is creating a new challenge for IT departments by changing the border of the enterprise network?

tablets*
company-owned desktops
energy costs
access layer switching

17 
Which network architecture functions through a combination of technologies that include wired, wireless, security, and more?

Cisco Borderless*
Cisco Enterprise Campus
Cisco Enterprise Edge
Cisco Enterprise Branch

18 
Which network architecture combines individual components to provide a comprehensive solution allowing people to cooperate and contribute to the production of something?

Cisco Enterprise Campus Architecture
Cisco Enterprise Branch Architecture
Cisco Borderless Network Architecture
Cisco Collaboration Architecture*

19 
Fill in the blank.
Reducing the complexity of network design by dividing a network into smaller
areas is an example of a ” hierarchical ” network model.​

20 
Fill in the blank. Use the abbreviation.
Under the Cisco Enterprise Edge module, the submodule that provides remote access
including authentication and IPS appliances is the ” VPN ” and remote access submodule.

21

Place the options in the following order:

- not scored – 
core 
ccess 
distribution

22

Place the options in the following order:
[+] campus core 
[+] building distribution 
[+] data center

[#] VPN and remote access 
[#] DMZ 
[#] e-commerce

[+] Order does not matter within this group.
[#] Order does not matter within this group.

Semoga Bermanfaat ............................

Baca Juga

CCNA 4 chapter 2 2014

http://jarkomja.blogspot.com/2014/11/ccna-4-chapter-2.html